Torellian Invader (1.6" upscale)

From Danno's Rocket Wiki
Revision as of 20:20, 20 June 2023 by Danno (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This is an upscale of my Torellian Invader, made mostly out of an Estes Super Neon XL kit. The tubes and motor mount were from the Super Neon XL, the fins were hand-cut from 1/8" basswood, and the nose and canopy were 3D printed from my own approximations. The stickers came from StickerShock23. I did not get the shape of the canopy exactly right, so the sticker for the canopy did not fit smoothly over the 3D printed part; I decided to just paint it silver and may possibly try adding some more detail to it. I also did not find olive green paint at Michael's, so in order to get it done in time for my club launch I used hunter green rustoleum that I got from Menard's. So it doesn't match the original very closely, but I still think it looks good. First flight is planned for the SLRA Summer Solstice launch on June 24, 2023, on an E30-4.

  • An upscaled Torellian Invader model rocket next to the original.

    Finished rocket.

  • An upscaled Torellian Invader model rocket next to the original.

    Finished rocket.

  • A green painted Torellian Invader model rocket on a workbench.

    Painted, ready for vinyl.

  • An unpainted upscaled Torellian Invader model rocket on a workbench alongside a finished original Torellian Invader.

    Assembled rocket before painting.

  • A 3d-printed nose cone for the Torellian Invader, with egg-shaped bulges on the sides.

    3d-printed nose cone.

  • A stack of model rocket fins on a cutting mat.

    Fins cut from 1/8 inch thick basswood.

  • The unpainted upscale Torellian Invader clamped to an alignment jig with a fin tacked in place. Alongside it is the finished original Torellian Invader.

    Tacking on the first fin.

  • The unpainted upscale Torellian Invader taped to a different alignment jig with the side fins tacked in place.

    Tacking on the side fins.

Retrieved from "http://rocketwiki.danno.org/index.php?title=Torellian_Invader_(1.6%22_upscale)&oldid=1037"