Torellian Invader (1.6" upscale): Difference between revisions
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* The nose cone and canopy will need to be 3D-printed, but I can re-use those designs when I do a [[Torellian_Invader_(3"_or_4"_upscale)|bigger upscale.]] | * The nose cone and canopy will need to be 3D-printed, but I can re-use those designs when I do a [[Torellian_Invader_(3"_or_4"_upscale)|bigger upscale.]] | ||
* Thinking about papering the fins (see [https://www.apogeerockets.com/Advanced_Construction_Videos/Rocketry_Video_16 here] and [https://www.apogeerockets.com/Advanced_Construction_videos/Rocketry_Video_381 here]). | * Thinking about papering the fins (see [https://www.apogeerockets.com/Advanced_Construction_Videos/Rocketry_Video_16 here] and [https://www.apogeerockets.com/Advanced_Construction_videos/Rocketry_Video_381 here]). | ||
TODOS: | |||
* Measure Super Neon XL parts | |||
* Measure Torellian Invader parts, including all fin shapes | |||
* Design & print templates for 1.6 upscale fins | |||
* Cut fins from plywood | |||
* Design nose cone in OpenSCAD | |||
* Print nose cone | |||
* Design & print fin alignment jig | |||
* Assemble motor mount | |||
* Assemble tube fins | |||
* Assemble wood fins | |||
* Paint | |||
* Design vinyl | |||
* Cut vinyl | |||
* Apply vinyl | |||
Revision as of 15:02, 23 April 2023
This is a placeholder page for a future project, to build a 1.6" diameter upscaled Torellian Invader out of an Estes Super Neon XL kit.
- The nose cone and canopy will need to be 3D-printed, but I can re-use those designs when I do a bigger upscale.
- Thinking about papering the fins (see here and here).
TODOS:
- Measure Super Neon XL parts
- Measure Torellian Invader parts, including all fin shapes
- Design & print templates for 1.6 upscale fins
- Cut fins from plywood
- Design nose cone in OpenSCAD
- Print nose cone
- Design & print fin alignment jig
- Assemble motor mount
- Assemble tube fins
- Assemble wood fins
- Paint
- Design vinyl
- Cut vinyl
- Apply vinyl