Torellian Invader (1.6" upscale): Difference between revisions

Latest revision as of 20:20, 20 June 2023

This is an upscale of my Torellian Invader, made mostly out of an Estes Super Neon XL kit. The tubes and motor mount were from the Super Neon XL, the fins were hand-cut from 1/8" basswood, and the nose and canopy were 3D printed from my own approximations. The stickers came from StickerShock23. I did not get the shape of the canopy exactly right, so the sticker for the canopy did not fit smoothly over the 3D printed part; I decided to just paint it silver and may possibly try adding some more detail to it. I also did not find olive green paint at Michael's, so in order to get it done in time for my club launch I used hunter green rustoleum that I got from Menard's. So it doesn't match the original very closely, but I still think it looks good. First flight is planned for the SLRA Summer Solstice launch on June 24, 2023, on an E30-4.

Finished rocket.
Finished rocket.
Painted, ready for vinyl.
Assembled rocket before painting.
3d-printed nose cone.
Fins cut from 1/8 inch thick basswood.
Tacking on the first fin.
Tacking on the side fins.

@@ Line 1: / Line 1: @@
-This is a placeholder page for a future project, to build a 1.6" diameter upscaled Torellian Invader out of an Estes Super Neon XL kit.
+{{RocketInfoBox
+ |image        = Torellian-invader-finished-1.jpg
+ |diameter     = 1.6 inches (41mm)
+ |length       = 33.5 inches (0.85 m)
+ |weight       = 9.25 oz. (262 g)
+ |motor-size   = 24mm
+ |recovery     = Top Flight 20" X-Type parachute (black/neon green)
+ |flights      = 0
+ |max-altitude = TBD
+ |max-speed    = TBD
+ |status       = Ready to fly
+ |simfile      = TBD
+}}
+This is an upscale of my [[Torellian Invader]], made mostly out of an Estes Super Neon XL kit. The tubes and motor mount were from the Super Neon XL, the fins were hand-cut from 1/8" basswood, and the nose and canopy were 3D printed from my own approximations. The stickers came from [https://stickershock23.com/ StickerShock23]. I did not get the shape of the canopy exactly right, so the sticker for the canopy did not fit smoothly over the 3D printed part; I decided to just paint it silver and may possibly try adding some more detail to it. I also did not find olive green paint at Michael's, so in order to get it done in time for my club launch I used hunter green rustoleum that I got from Menard's. So it doesn't match the original very closely, but I still think it looks good. First flight is planned for the SLRA Summer Solstice launch on June 24, 2023, on an E30-4.
+<gallery mode="slideshow">
+File:Torellian-invader-finished-2.jpg|Finished rocket.|alt=An upscaled Torellian Invader model rocket next to the original.
+File:Torellian-invader-finished-1.jpg|Finished rocket.|alt=An upscaled Torellian Invader model rocket next to the original.
+File:Torellian-invader-painted.jpg|Painted, ready for vinyl.|alt=A green painted Torellian Invader model rocket on a workbench.
+File:Torellian-invader-before-painting.jpg|Assembled rocket before painting.|alt=An unpainted upscaled Torellian Invader model rocket on a workbench alongside a finished original Torellian Invader.
+File:Torellian-invader-1.6-nose.jpg|3d-printed nose cone.|alt=A 3d-printed nose cone for the Torellian Invader, with egg-shaped bulges on the sides.
+File:Torellian-invader-1.6-fins.jpg|Fins cut from 1/8 inch thick basswood.|alt=A stack of model rocket fins on a cutting mat.
+File:Torellian-invader-1.6-assembly-1.jpg|Tacking on the first fin.|alt=The unpainted upscale Torellian Invader clamped to an alignment jig with a fin tacked in place. Alongside it is the finished original Torellian Invader.
+File:Torellian-invader-1.6-assembly-2.jpg|Tacking on the side fins.|alt=The unpainted upscale Torellian Invader taped to a different alignment jig with the side fins tacked in place.
+</gallery>
+[[Category:Rockets]]