Peregrine: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Peregrine is built from a Wildman Mach 3 kit (75mm minimum diameter) and am planning for a launch at Airfest 2024. The flight will be on an AeroTech M685 motor and should exceed 30,000 feet AGL. | Peregrine is built from a [https://wildmanrocketry.com/collections/3-fiberglass/products/mach-3 Wildman Mach 3] kit (75mm minimum diameter) and am planning for a launch at Airfest 2024. The flight will be on an [https://aerotech-rocketry.com/products/product_fe1f54bf-9bef-7bef-067f-44f3d7a29d86 AeroTech M685] motor and should exceed 30,000 feet AGL. | ||
* Primary altimeter: Altus Metrum TeleMega with a single 850mAh battery for electronics and pyro | * Primary altimeter: [https://altusmetrum.org/TeleMega/ Altus Metrum TeleMega] with a single 850mAh battery for electronics and pyro | ||
* Backup altimeter: Altus Metrum EasyMini with a single 850mAh battery for electronics and pyro | * Backup altimeter: [https://altusmetrum.org/EasyMini/ Altus Metrum EasyMini] with a single 850mAh battery for electronics and pyro | ||
* Camera: RunCam 5 Orange, inside the av-bay looking out horizontally | * Camera: [https://shop.runcam.com/runcam-5-orange/ RunCam 5 Orange], inside the av-bay looking out horizontally | ||
* Motor retention: | * Motor retention: [https://aeropack.net/pages/min-dia-retainers Aero Pack minimum diameter thread-on retainer] | ||
* Main recovery: head-end, [https://shop.fruitychutes.com/collections/iris-ultra-standard-chutes/products/iris-ultra-48-standard-parachute-12-5lbs-20fps Fruity Chutes 48" Iris Ultra] (tentative; will try [https://spherachutes.com/products/48-inch-spherachute?variant=41482280960255 48" Spherachutes Ultralight] if that doesn't fit, although this will be a bit small; could also buy a [https://shop.fruitychutes.com/collections/iris-ultra-compact-chutes/products/iris-ultra-36-hp-compact-chute-7lb-20fps-3-9lb-15fps 36" Iris Ultra HP Compact]) | * Main recovery: head-end, [https://shop.fruitychutes.com/collections/iris-ultra-standard-chutes/products/iris-ultra-48-standard-parachute-12-5lbs-20fps Fruity Chutes 48" Iris Ultra] (tentative; will try [https://spherachutes.com/products/48-inch-spherachute?variant=41482280960255 48" Spherachutes Ultralight] if that doesn't fit, although this will be a bit small; could also buy a [https://shop.fruitychutes.com/collections/iris-ultra-compact-chutes/products/iris-ultra-36-hp-compact-chute-7lb-20fps-3-9lb-15fps 36" Iris Ultra HP Compact]) | ||
* Apogee recovery: [https://spherachutes.com/products/apex-drogue Spherachutes Apex drogue] (tentative) | * Apogee recovery: [https://spherachutes.com/products/apex-drogue Spherachutes Apex drogue] (tentative) | ||
* Using CTI Pro75 6G motor case with tailcone closure | * Using [http://www.pro38.com/pdfs/Pro75_dimensions.pdf CTI Pro75 6G motor case with tailcone closure] | ||
* Using Additive Aerospace fly-away rail guide | * Using [https://www.additiveaerospace.com/products/fly-away-rail-guides Additive Aerospace fly-away rail guide] | ||
[[File:Peregrine-openrocket.png| | <center> | ||
[[File:Peregrine-openrocket.png|800px|alt="Screen shot of Peregrine design in OpenRocket"]] | |||
</center> | |||
[[Category:Rockets]] | [[Category:Rockets]] | ||
Revision as of 17:40, 2 February 2024
Peregrine is built from a Wildman Mach 3 kit (75mm minimum diameter) and am planning for a launch at Airfest 2024. The flight will be on an AeroTech M685 motor and should exceed 30,000 feet AGL.
- Primary altimeter: Altus Metrum TeleMega with a single 850mAh battery for electronics and pyro
- Backup altimeter: Altus Metrum EasyMini with a single 850mAh battery for electronics and pyro
- Camera: RunCam 5 Orange, inside the av-bay looking out horizontally
- Motor retention: Aero Pack minimum diameter thread-on retainer
- Main recovery: head-end, Fruity Chutes 48" Iris Ultra (tentative; will try 48" Spherachutes Ultralight if that doesn't fit, although this will be a bit small; could also buy a 36" Iris Ultra HP Compact)
- Apogee recovery: Spherachutes Apex drogue (tentative)
- Using CTI Pro75 6G motor case with tailcone closure
- Using Additive Aerospace fly-away rail guide
