Danno at 02:10, 29 November 2021

2021-11-29T02:10:34Z

← Older revision		Revision as of 21:10, 28 November 2021
Line 14:		Line 14:
	Kestrel is my first minimum-diameter high-power rocket. I built it between June and August 2018, planning to fly it at Airfest that year, but had to cancel that trip due to a family emergency. I ended up painting it in December and then taking it to Airfest in 2019.		Kestrel is my first minimum-diameter high-power rocket. I built it between June and August 2018, planning to fly it at Airfest that year, but had to cancel that trip due to a family emergency. I ended up painting it in December and then taking it to Airfest in 2019.

	The kit is a Wildman Mach Two, built with three fins instead of the four that came with the kit. I learned later that high-performance rockets like this are often designed with four fins to reduce coning. With three fins, the rocket did experience quite a bit of coning on its first flight (see launch report linked below). Other components used: Aero Pack thread-on motor retainer, Cesaroni tailcone rear closure, Spherachutes 36" ultra-light parachute, and an Altus Metrum TeleMega with a Featherweight magnetic switch. The rocket is built specifically for Cesaroni 6-grain motors. While it would ~~theoretically~~ be possible to fly a shorter motor using Aero Pack's adapter system, I have no plans to do so.		The kit is a Wildman Mach Two, built with three fins instead of the four that came with the kit. I learned later that high-performance rockets like this are often designed with four fins to reduce coning. With three fins, the rocket did experience quite a bit of coning on its first flight (see launch report linked below). Other components used: Aero Pack thread-on motor retainer, Cesaroni tailcone rear closure, Spherachutes 36" ultra-light parachute, and an Altus Metrum TeleMega with a Featherweight magnetic switch. The rocket is built specifically for Cesaroni 6-grain motors. While it would be possible to fly a shorter motor using Aero Pack's adapter system, I have no plans to do so.

	== Build ==		== Build ==

Danno: Created page with "{{RocketInfoBox |image = Kestrel-ldrs38-edit.jpg |diameter = 2.24 inches (57mm) |length = 4 feet 1 inch (1.2 m) |weight = 2 lbs. 13.5 oz. (1.3 kg) |motor-size = 54mm |flights = 1 |max-altitude = 20846 feet AGL (TeleMega, GPS) (6354 m) |max-speed = 1766 ft/sec (1204 mph, Mach 1.6) (TeleMega, accelerometer) |status = Ready to fly |simfile = https://github.com/DanCrank/openrocket-sim-files/blob/master/kestrel.ork }} Kes..."

2021-11-29T02:08:52Z

Created page with "{{RocketInfoBox |image = Kestrel-ldrs38-edit.jpg |diameter = 2.24 inches (57mm) |length = 4 feet 1 inch (1.2 m) |weight = 2 lbs. 13.5 oz. (1.3 kg) |motor-size = 54mm |flights = 1 |max-altitude = 20846 feet AGL (TeleMega, GPS) (6354 m) |max-speed = 1766 ft/sec (1204 mph, Mach 1.6) (TeleMega, accelerometer) |status = Ready to fly |simfile = https://github.com/DanCrank/openrocket-sim-files/blob/master/kestrel.ork }} Kes..."

New page

{{RocketInfoBox
|image = Kestrel-ldrs38-edit.jpg
|diameter = 2.24 inches (57mm)
|length = 4 feet 1 inch (1.2 m)
|weight = 2 lbs. 13.5 oz. (1.3 kg)
|motor-size = 54mm
|flights = 1
|max-altitude = 20846 feet AGL (TeleMega, GPS) (6354 m)
|max-speed = 1766 ft/sec (1204 mph, Mach 1.6) (TeleMega, accelerometer)
|status = Ready to fly
|simfile = https://github.com/DanCrank/openrocket-sim-files/blob/master/kestrel.ork
}}

Kestrel is my first minimum-diameter high-power rocket. I built it between June and August 2018, planning to fly it at Airfest that year, but had to cancel that trip due to a family emergency. I ended up painting it in December and then taking it to Airfest in 2019.

The kit is a Wildman Mach Two, built with three fins instead of the four that came with the kit. I learned later that high-performance rockets like this are often designed with four fins to reduce coning. With three fins, the rocket did experience quite a bit of coning on its first flight (see launch report linked below). Other components used: Aero Pack thread-on motor retainer, Cesaroni tailcone rear closure, Spherachutes 36" ultra-light parachute, and an Altus Metrum TeleMega with a Featherweight magnetic switch. The rocket is built specifically for Cesaroni 6-grain motors. While it would theoretically be possible to fly a shorter motor using Aero Pack's adapter system, I have no plans to do so.

== Build ==

ProLine epoxy was used for all bonding. No additional fiberglass reinforcement (i.e., tip-to-tip) was used. The rocket was finished with Rustoleum sandable primer and Rustoleum gloss enamel, and the graphics were made on my vinyl cutter.

<gallery mode="slideshow">
File:Kestrel-build-01-finjig.jpg|Bonding of fins to airframe.|alt=Bonding of fins to airframe.
File:Kestrel-build-02-sled.jpg|Kestrel's sled with TeleMega.|alt=Kestrel's sled with TeleMega.
File:Kestrel-build-03-antenna.jpg|Kestrel's antenna protector.|alt=Kestrel's antenna protector.
File:Kestrel-build-04-finished.jpg|Finished rocket, with motor alongside it.|alt=Finished rocket, with motor alongside it.
</gallery>

== Launches ==

[[2019 Launch Reports#Kestrel, K260|Airfest 2019, K260]]

[[Category:Rockets]]

Kestrel - Revision history

Danno at 02:10, 29 November 2021